Buick Enclave Owner's Manual page 247

Temperature Control
The driver and passenger side
temperature buttons are used
to adjust the temperature of
the air coming through the
system. The temperature can be
adjusted even if the system is
turned off since outside air still
enters the vehicle, unless the
recirculation mode is selected.
See Recirculation later in this
section.
Driver Side Temperature
Control: Press the + or
to increase or decrease the driver
side temperature. The driver side
temperature display will show the
temperature setting.
Passenger Side Temperature
Control: Press the + or
to increase or decrease the
passenger side temperature.
The passenger side display will
show the temperature setting.
PASS (Passenger): Press to
set the passenger temperature
to match the driver temperature
setting. The PASS indicator will
turn off. When the passenger
temperature setting is different
than the driver setting, the PASS
indicator comes on.
Manual Operation
The air delivery mode or fan speed
can be manually adjusted.
/ (Fan Control): Press to
increase or decrease the fan speed.
buttons
Pressing or
control places the fan speed under
manual control.
The air delivery mode remains in
automatic control. The fan setting
buttons
still displays, but the word AUTO
no longer displays, and the AUTO
button indicator light turns off.
I n f o r ma t i o n P r o v i d e d b y :
Control): Press to change the
direction of the airflow in the vehicle.
Repeatedly press
the desired mode appears on the
display. Pressing a mode button
while the system is off changes the
air delivery mode without turning the
system on. Press a mode button
while in automatic control to place
the system into manual control.
The air delivery mode setting still
displays, but the word AUTO no
longer displays, and the AUTO
button indicator light turns off.
while in automatic
H
instrument panel outlets.
)
between the instrument panel
and floor outlets. Some air is
directed towards the windshield
and side window outlets. Cooler
air is directed to the upper outlets
and warmer air to the floor outlets.
Climate Controls
/ (Air Delivery Mode
or until
(Vent): Air is directed to the
(Bi-Level): Air is divided
8-3