Buick Enclave Owner's Manual page 64

3-10 Seats and Restraints
4. Make sure that the safety belt is
unfastened and in the stowed
position.
5. Pull the sliding seat lever (C)
forward and move the seatback
forward. The seat cushion will
fold, and the entire seat will slide
forward. The head restraints will
fold out of the way automatically.
Returning the Seat to the
Seating Position
To return the second row seat to its
normal seating position:
1. Remove objects on the floor
behind the second row seat or
in the seat tracks on the floor.
2. Pull the seatback rearward until
it is locked in place.
3. Slide the seat rearward by
pushing on the seatback until
it is locked into place.
4. Return the head restraint to the
upright position by reaching
behind the seat and pulling the
head restraint forward until it
locks into place.
Push and pull on the head
restraint to make sure that it
is locked.
5. Push down on the rear of the
seat cushion until it is locked in
place.
6. Push and pull on the seatback
and seat cushion to make sure
they are locked in place.
7. Check that the safety belt is not
under the seat cushion.
I n f o r ma t i o n P r o v i d e d b y :
Reclining the Seatbacks
To recline the seatback:
1. Leaning forward in the seat, pull
the reclining seatback strap (B).
2. Move the seatback to the
desired position, and then
release the strap to lock the
seatback in place.
3. Push and pull on the seatback to
make sure it is locked.
Folding the Seatback
To fold the second row seatbacks:
1. Remove anything on or under
the seat.
2. Place the armrest in the upright
position, and unfasten the
safety belt.
3. Pull forward on the reclining
seatback strap (B) and push
down on the seatback.
The head restraint will fold down
automatically.