Operation - Kärcher K 5.800 eco!ogic Operating Instructions Manual

Operation

Switch position "eco"
There are the switch positions "1/ON" and
"eco" to switch the appliance on.
Note: The switch position "eco" allows the
control of pressure and leads to water and
energy savings of approx. 20% by using the
spray lance.
Recommended application ranges for
switch position "eco"
Before Startup
Mount loose parts delivered with appliance
prior to start-up.
Install the storage for hand-spray gun
Illustration
 Place the bottom holder into the recess-
es and push forward until it audibly
locks in.
Illustration
 Insert the top holder and push down all
the way.
Install the storage hook for the mains
connection cable
Option
Illustration
 Install the top storage hook.
6 English
Install the dosage regulator for
detergent
You will need the 2 included screws as well
as a Philips screwdriver PH 2.
Illustration
 Insert both detergent hoses onto the
hose fittings.
 Install the dosage regulator and con-
nect using 2 screws.
Install the transport handle
Illustration
 Wind up the high-pressure hose on the
hose drum.
Illustration
 Slide the free end of the coiled high
pressure hose through the recesses on
the dosage regulator.
Illustration
 Attach the transport handle, insert the
bolts into the bores and screw them in.
Illustration
 Press the connecting fitting from the
short high pressure hose into the brass
intake until it locks into place audibly.
Check the secure connection by pulling
on the high pressure hose.
Connect the high pressure hose to the
hand spray gun
Illustration
 Push the high pressure hose into the
trigger gun until it locks audibly.
Note: Make sure the connection nipple
is aligned correctly.
Check the secure connection by pulling
on the high pressure hose.