Toshiba e-studio 55 Operator's Manual For Copying Functions page 88

Copying Procedure
1 Place the originals.
. Set the originals on the original feed tray with
page 1 facing upward and align the side
guides to the originals.
. The number of originals you can load at a
time is shown below.
A4, A4-R, B5, B5-R, A5-R : 60
. To set larger originals (A3, B4 or Folio size),
pull out the extension holder.
2 Place special sheets of paper in the
designated sheet-insertion cassette.
. For placing paper in the cassette, see page
126.
. If the appropriate cassette is not designated
for sheet-insertion copying, do so by referring
to page 87.
3
Select the sheet-insertion copying function
in the Editing menu.
. Press the EDIT key to enter the Editing
menu, then press the SHEET INSERTION
key.
. If the corresponding key is not displayed,
switch the screen by pressing the Next or
Pre key.
4
Press the BLANK or COPIED key.
. Inserting a blank special
sheet in front of the
specified page
. Inserting a copied spe-
cial sheet at the speci-
fied page
A3 : 30
B4 : 35
)
→
BLANK
)
→
COPIED
Slides
85