Toshiba e-studio 55 Operator's Manual For Copying Functions page 126

4
Select the desired copy size, exposure and
reproduction ratio.
5
Press the START key.
. To add more originals, press the CONTINUE
key during the scanning.
6
Copies exit onto the trays.
. When the finisher trays reach maximum
capacity, the following message appears:
Finisher full: Remove paper
Remove the copies from the trays and
press the START key to continue.
. To cancel copying, press the STOP key to
interrupt the copy run, then press the
MEMORY CLEAR key.
Tip
Number of punch holes and available paper
sizes:
Since the number of punch holes and the distance
between the holes vary depending on countries,
purchase a punching unit that meets your
requirement. (For details, consult your service
technician.)
Japan and most of
Europe (MJ-6002E)
North America
(MJ-6002N)
France
(MJ-6002F)
Sweden
(MJ-6002S)
Number of punch holes and hole diameter
2 holes
(6.5 mm dia.)
2/3 holes switchable
(8.0 mm dia.)
4 holes
(6.5 mm dia.; 80 mm pitch)
4 holes
(6.5 mm dia.; 70, 21 mm pitch)
Available paper sizes
A3, B4, A4, A4-R, B5,
B5-R, FOLIO
2 holes: LG, LT-R, COMP
3 holes: LD, LT
A3, A4
A3, B4, A4, A4-R, B5, B5-R,
FOLIO
123