Toshiba e-studio 55 Operator's Manual For Copying Functions page 31

4. ACTUAL-SIZE COPYING BY SPECIFYING THE COPY SIZE (Cont.)
When Placing the Original on the Glass
. After lifting the automatic document feeder,
place the original face down on the glass with
the bottom toward you, and the left side
centred against the original scale.
. The yellow indicators show the area of the
original to be copied.
. Close the automatic document feeder slowly.
4
Select the exposure and copy quantity as
required.
5
Press the START key.
Note: If there are sheets of paper set on the sheet bypass, you must press the COPY-SIZE key
corresponding to the size of sheets. (See page 50.)
28
FC
1 2 3
4 5 6
7 8 9
0 C