Toshiba e-studio 55 Operator's Manual For Copying Functions page 23

2. USING THE REVERSING AUTOMATIC DOCUMENT FEEDER (Cont.)
Copying in the Continuous Feed Mode
1
Press the PROGRAM key on the display
panel.
. The menu on the right appears.
2
Press the ADF key.
. The document feeder menu on the right
appears.
3
Press the ADF key on the panel to select
continuous feed.
. The ADF key is highlighted and set as the
default feed mode.
. The display panel returns to the original
display.
4
Select the desired copy size, reproduction
ratio, exposure and copy quantity.
. The automatic paper selection mode is set
as the default mode.
5
Place the originals on the original feed tray.
. After aligning the edges of the originals, set
them face up on the original feed tray and
align the slides to the edges of the originals.
. The number of originals you can load at a
time is shown below.
A4, A4-R, B5, B5-R, A5-R : 60
6
Press the START key.
. The originals are fed starting with the
lowermost one, copied and then exit onto the
original exit area.
20
A3 : 30
B4 : 35
Slides
Holder