Batch Mode
Whether within the connection range or not, in batch mode, the scanner stores all
scanned data that will be transferred to the host computer after scanning "Send Batch
Data" label.
Number of storable bar codes = 61,365 bytes of memory / (number of characters in the
bar code +2)
Batch mode
Clearing Batch
Use the settings in this section to clear the stored data.
Clear batch data after
send
Clear batch data by
scanning "Delete batch
data" label
Delete batch data
Handy Wireless Scanner
Start Of Configuration
Note: Scanner LED indicator will not flash while waiting for
connection in this mode.
Saved data are cleared after they are transferred to the
host.
Scan this label then scan "Save Setting" to delete the
stored batch data.
Same as previous setting but with alert sound.
Confirm Setting (for address and pin code setting
required)
End Of Configuration
U
M
SER
ANUAL
25