Programming Guide - Bematech BR200BT User Manual

Programming Guide

Program Procedure Using Barcode Manual
1. Power up the scanner.
2. Scan the Start of Configuration barcode.
3. Scan the barcode for the desired feature. Multiple features can be
enabled/disabled before scanning the End of Configuration barcode.
4. Scan the End of Configuration barcode and save the new configuration. Power
off and on the scanner when the setting is done.
5. To give up a configuration change, power off the scanner before scanning the
End of Configuration barcode or scan the Abort barcode.
6. For some parameter setting, such as barcode length and identifier code, it is
required to scan the Set barcode to save the configuration.
Scan the "End of
Configuration" barcode
Finish the configuration
Handy Wireless Scanner
Power up the scanner
Scan the "Start of
Configuration" barcode
Scan barcode of the
desired feature
Scan the "Abort" barcode
Discard the configuration
U M
SER ANUAL
Power off the scanner
13