Charging The Battery - Bematech BR200BT User Manual

U M
SER ANUAL

Charging the Battery

To charge the battery using the USB cable:
There are two method to charge scanner via USB cable.

Host USB Power

Power adaptor
1. Connect the micro USB connector directly to the scanner.
2. Connect the other end of the USB connector to the host to begin charging.
You can also connect the USB cable to an outlet using the power adapter to
charge the battery.
3. The battery begins charging when the scanner LED indicator starts flashing
green. LED turns steady green when charging is complete.

The scanner will power on automatically when charging.

Batteries shipped may not be full charged and should be fully
charged for maximum charge capacity.

Recommended charging environment is temperature in 0°C~35°C (32
°
4
F~95°F).
Handy Wireless Scanner