Wireless Mode; Spp Slave Mode - Bematech BR200BT User Manual

Wireless Mode

The scanner connects to the host via wireless connection. You may select SPP Master or
SPP Slave for PC connection or select HID mode and Smart phone mode for smart phone
connection.

SPP Slave Mode

In this mode, the scanner connects to the host /PC via wireless connection and performs
like there's a serial connection. In SPP Slave mode, the scanner is discoverable from a
remote device and it can request the scanner for connection. There are several ways to
connect the wireless scanner to your PC. If you have your own applications please check
their User Manuals for pairing instructions.
To connect a wireless device to Window based system for the first time:
1. Turn on the host computer and activate its wireless connection.
2. Select "Add wireless device". Or open the dialog BT devices and click "Add".
3. Power on the scanner and program it with "SPP Slave mode" label.
Scanner SPP Slave enable
4. On Devices tab, click Add. This will open the Add wireless Device Wizard.
5. Select the "My device is set up and ready to be found" checkbox, and then
click Next.
6. The scanner should be on the list of discoverable devices. The default name
of the scanner is "BR200BT". Select "BR200BT" and click "Next".
7. Select "Let me choose my own passkey" and enter the pin code. The default
pin code is "12345678.
8. Click "Next" to connect the scanner to the host. A short beep should be
heard upon connection.
Handy Wireless Scanner
Start Of Configuration
Enable wireless SPP Slave mode.
End Of Configuration
U M
SER ANUAL
19