Setting Pin Code; Deleting Pin Code; Reset Name - Bematech BR200BT User Manual

U M
SER ANUAL

Setting Pin Code

1. To change the pin code, use the "Set pin code" setting. Default is "12345678".
2. Use the ASCII table in Programming Guide to input the new code (must be at
least 4 digits and not more than 8 numeric digits).
3. Scan "Save Setting" to store the pin code.
Set pin code
Please check the User Manual from your PC for

Deleting pin code

To delete pin code, use the "Delete pin code setting".
Delete pin code

Reset Name

To change the scanner name back to the default name "BR200BT" use the "Default
device name" setting.
Default device name
22
Start Of Configuration
Set pin code (SPP Master only)
Confirm Setting (for address and pin code setting
required)
Delete the stored pin code.
Change device name back to default "BR200BT".
End Of Configuration
wireless
address and pin code.
Handy Wireless Scanner