Setting Name; Wireless Discovery - Bematech BR200BT User Manual

Setting Name

1. To change the name displayed when the scanner is discovered, scan the
"Friendly device name set" label. Default name is "BR200BT".
2. Use the ASCII table in Programming Guide to input the name (Max.12 digits).
3. Scan "Confirm Setting" to store the new name.
Friendly device name set

Wireless Discovery

Use the following settings to show or hide the device from wireless discovery.
Discover enable
Discover disable
Handy Wireless Scanner
Start Of Configuration
Change the display name when scanner is
discovered.
Confirm Setting (for address and pin code
setting required)
Make scanner visible to wireless device.
Make scanner invisible to wireless device.
End Of Configuration
U M
SER ANUAL
23