Setting Up The Network - HIKVISION DS-72xxHGHI-SH Quick Start Manual

5. SETTING UP THE NETWORK

SETTING UP NETWORK ACCESS
Networking a DVR requires 3 steps:
1. Assign an IP address, Default Gateway, Subnet Mask, and a DNS server (Please note: DNS,
not DDNS) to the DVR
2. Forward the appropriate ports on the router (Port Forwarding).
3. Register DDNS (DDNS registration is required only if the public IP address is Dynamic).
To assigning an IP ADDRESS, go to "MENU">"SYSTEM CONFIGURATION">"NETWORK"
General
Select NIC
Type
 Please note that the DVR have a default IP Address set to
IP CONFIGURATION
Enable
With DHCP
enabled, the
router will
assign an IP
address to
the DVR
192.0.0.64
www.hikvision.com/en/us
DHCP