5. SETTING UP THE NETWORK
SETTING UP NETWORK ACCESS
Networking a DVR/NVR requires 3 steps:
1. Assign an IP address, Default Gateway, Subnet Mask, and a DNS server (Please note: DNS,
not DDNS) to the DVR/NVR
2. Forward the appropriate ports on the router (Port Forwarding).
3. Register DDNS (DDNS registration is required only if the public IP address is Dynamic).
To assign an IP ADDRESS, go to "MENU">"SYSTEM CONFIGURATION">"NETWORK"
General
Select NIC
Please note that the DVR/NVR have a default IP Address set to
IP CONFIGURATION
Working
Mode
Default
Route
Enable
DHCP
With DHCP
enabled, the
router will
assign an IP
address to
the
DVR/NVR
192.0.0.64
www.hikvision.com/en/us