Connecting A Bluetooth Audio Player; Disconnecting A Bluetooth Audio Player - Pioneer Avic-D3 Operation Manual

Operating with different
head units
Section
( JGI
- - - - - - - - - - - - - - - - - - - - - -
Connecting a Bluetooth
audio player
For this unit to control your Bluetooth audio
player it needs to establ ish a BI uetooth wi re-
less connection.
This function initiates the connection via Blue-
tooth wi reless tech nology.
~
Important
When usi ng th is unit as an external unit, the PI N
code is set to 0000. You can not change the PIN
code. This unit can connect only the Bluetooth
audio player which request 0000 as the PIN code
or does not request any PIN code.
1 Put the unit in C.OPEN mode
Refer to Function compatibility charts on page
26.
This unit is now on standby for connection
from Bluetooth audio player.
If your Bluetooth audio player is set ready for
Bluetooth wireless connection, connection to
this unit will be automatically established.
• Before you put the unit in C.OPEN mode
NO AUDIO is displayed.
2 Use the Bluetooth audio player to con-
nect to this unit.
When the connection is established,
B1 AUDIO is displayed.
•
Operation varies depend i ng on the type of
your Bluetooth audio player. Refer to the instruc-
tion manual that came with your Bluetooth audio
player for detailed instructions.
• You may need to enter the link code on you'r
Bluetooth audio player to complete the con-
nection.
C!J
Disconnecting a Bluetooth
audio player
When you are done using your Bluetooth
audio player with this unit, you can close the
Bluetooth wireless connection.
• Put the unit in DISCONN. mode.
Refer to Function compatibility charts on page
26.
After the disconnection is completed,
NO AUDIO is displayed.
C!J
En
CID