Bluetooth Audio Player; Starting Procedure; Aux Source - Pioneer AVIC-EVO1 Operation Manual

Bluetooth audio player
Playback screen 1
Skips files forward or backward.
Plays files in random order.
Playback screen 2
Sets a repeat play range.
Switches between playback
and pause.
Selects a file from the list.
Refer to Selecting files from the file name list on
page 49
p Depending on the Bluetooth audio player connected to this
product, the available operations with this product may be
limited to the following two levels:
— A2DP (Advanced Audio Distribution Profile): Only playing
back songs on your audio player is possible.
— A2DP and AVRCP (Audio/Video Remote Control Profile):
Playing back, pausing, selecting songs, etc., are possible.
p Depending on the Bluetooth audio player connected to this
product, some functions may not be available.
p While you are listening to songs on your Bluetooth device,
please refrain from operating the phone function as much as
possible. If you try operating, the signal may cause noise for
song playback.
p When you are talking on the Bluetooth device connected to
this product via Bluetooth, it may pause playback.
p By rotating the rotary encoder, you can also skip to the next
file or previous file.
p By rotating and holding the rotary encoder, you can also
perform fast reverse or fast forwards.
Starting procedure
p Before using the Bluetooth audio player, register and con-
nect the device to this product.
Refer to Registering your Bluetooth devices on page 28
1 Display the "System" setting screen.
HOME
2 Touch [AV Source Settings].
3 Confirm that "Bluetooth Audio" is turned on.
4 Display the AV source selection screen.
HOME
5 Touch [Bluetooth Audio].
name list
p This function is available only when the AVRCP version of the
Bluetooth device is 1.4 or higher.
1 Touch .
2 Touch a file or a folder on the list to play back.
AUX source
Hides the touch panel keys.
To display again the keys, touch
anywhere on the screen.
Switches between the video input
and the sound input.
p A Mini-jack AV cable (CD-RM10) (sold separately) is required
for connection.
Refer to the Installation Manual.
p You can set the screen size for the video image.
Refer to Changing the wide screen mode on page 62
CAUTION
For safety reasons, video images cannot be viewed while your
vehicle is in motion. To view video images, stop in a safe place
and apply the handbrake.
Starting procedure
You can display the video image output by the device connected
to video input.
1 Display the "System" setting screen.
HOME
2 Touch [Input/Output Settings].
3 Confirm that "AUX Input" is turned on.
4 Display the AV source selection screen.
49