Pioneer Avic-D3 Operation Manual page 180

• Never connect speakers with an output rating of less than 50 W channel or impedance
outside of the 4 ohms to 8 ohms specifications to your navigation system. Connecting
speakers with output and/or impedance values other than those noted here may result in
the speakers catching fire, emitting smoke, or becoming damaged.
• When the ignition switch is turned on (ACC ON), a control signal is output through the
blue/white lead. Connect to an external power amp's system remote control terminal
(max. 300 rnA 12 V DC). The control signal is output through the blue/white lead, even
if the audio source is switched off.
• When an external power amp is being used with this system, be sure not to connect the
blue lead to the amp's power terminal. Likewise, do not connect the blue lead to the
power terminal of the antenna control. Such connection could cause excessive current
drain and malfunction as well as damage to the antenna control of the vehicle.
m
::,::,
CC
The Navigation unit
Extension lead
(for reverse signal)
RCA connector
Power cord
Extension lead
(for speed signal)
Connector
GPS antenna
-