Registering Connected Cellular Phone; Disconnecting A Cellular Phone; Voice Recognition; Setting The Automatic Answering - Pioneer Avic-D3 Operation Manual

Operating with different
head units
Section
[ J
CD
Registering connected
cellular phone
You can reg ister a phone that is tem porari Iy
connected to this unit in order to take full ad-
vantage of the featu res avai lable with BI ue-
tooth wireless technology. Only one cellular
phone can be reg istered.
1 Put the unit in REGIST mode
Refer to Function compatibility charts on page
26.
Before you put the unit in REGIST mode TEL is
displayed.
2 Use cellular phone to register to this
unit.
When the registration is completed, TEL REG.
is displayed.
• Operation varies depending on the type of
you r cell ular phone. Refer to the instruction man-
ual that came with your cellular phone for de-
tailed instructions.
• You may need to enter the link code on your
cellular phone to complete the connection.
0
Disconnecting a cellular phone
When you are done usi ng you r phone with th is
unit, you can close the Bluetooth wireless con-
nection.
• Put the unit in DISCONN. mode
Refer to Function compatibility charts on page
26.
After the disconnection is completed, NO TEL
is displayed.
0
Voice, recogn ition
If your cellular phone features voice recogni-
tion technology, you can make a call by voice
commands.
• Operation varies depending on the type of
your cellular phone. Refer to the instruction
manual that came with your cellular phone
for detai led instructions.
• This function can be operated only when
the connection is established with
HFP
(Hands Free Profi Ie).
Put the unit in VOICE ON mode.
2 Pronounce the name of your contact. 0
Setting the automatic
answering
If this function is on, this unit automatically
answers all incoming calls.
• Turn the automatic answering on or off
Refer to Function compatibility charts on page
26.
The status will be displayed (e.g"
ANSWON).0
En
®