VIII) SEACOCKS AND SKIN FITTINGS
Close all the seacocks when you leave the boat.
The flushing toilets may be situated below the waterline ; get into the habit of systematically
closing the seacocks after each use.
Make sure that all the seacocks which are not used are closed before you put out to sea. (in the owner's
manual, see the drawing where the lay out of the skin fittings is shown).
Opening and closing of the seacocks
REF
DESCRIPTION
1
Heads Outlet
2
Heads Intake
3
Washbasin Outlet
5
Sink Outlet
6
Engine Cooling Water Intake
7
Sea Water Foot Pump Intake (optional)
8
Stern Tube Skin Fitting
9
Log / Sounder Skin Fitting
MAJ ANGL 01/02/02
Open
Closed
OCEANIS 361
17/35