GRE GINA User Manual page 8

GRE Wireless LAN
1. Click " ..." button and a dialog box appeared. Select the firmware file, which you want to
upgrade your Wireless Bridge. Then click "Open" button
2. Click "Download" button to process firmware upgrade
3. The AP Utility process firmware upgrade now. Please wait for a moment.
4. Firmware upgrade succeeded.
Utilities (Configuring Wireless AP/Bridge) :
A. Under the window that appears, there are four options:
The "Get" button in order to view the current parameters of the Wireless Bridge
The "Modify" button in order to set new values to the pre-selected parameters
The "Set" button to download any changes to the Wireless Bridge.
The "Exit" button to exit this utility
B. Configuration Settings: Select "Configuration Settings" then click "Get" button. The "Identifier"
and "Value" column display Wireless Bridge's status. From this screen, you can view the
status information and modify the Wireless Bridge status.
•
MAC Address: The MAC Address of the Wireless Bridge. Unique 48-bit, hard-coded Media
Access Control address known as the station identifier.
•
Regulation Domain: Different Country and region
•
Eth_ IP_ Address: The IP Address of the Wireless Bridge. Network-assigned Internet
Protocol address of the Wireless Bridge.
GINA Access Point/Bridge User Guide
Page 5