GRE GINA User Manual page 14

GRE Wireless LAN
Setup Menu :
Bridge :
Under the "Bridge" submenu, there are two options:
1. IP Configuration
2. Wireless LAN
a) IP Configuration
•
MAC Address: The MAC Address of the Wireless AP/Bridge. Unique 48-bit,
hardcoded Media Access Control address known as the station identifier.
•
IP Address: The IP Address of the Wireless AP/Bridge. Network-assigned Internet
Protocol address of the Wireless AP/Bridge.
•
IP Mask: The Ethernet Station and the Wireless Point must be on the same subnet.
The IP address for the Wireless AP/Bridge must correspond to the Subnet Mask.
Subnet Mask consists of four sets of three digits that divide a network into
subnetworks
•
DHCP Enable: DHCP client is enabled the IP Address field displays the IP Address
that was dynamically assigned to the Wireless Bridge by the network DHCP server
and the IP Mask field displays the IP Mask utilized by the network DHCP server.
Additionally you have to select the Primary Port which is the interface that determines
the DHCP server.
If changes are made, you need to "Download Changes" under the "File" menu in order to save
them.
b) Filtering
•
IP Routing: If the IP Routing is enabled, only the IP protocol packets will pass
through the WLAN and any other protocol will be filtered out. If changes are made,
you need to "Download Changes" under the "File" menu in order to save them.
GINA Access Point/Bridge User Guide
Page 11