Table of Contents
Advertisement
GRE Wireless LAN
2. Select Search for the best driver for your device. (Recommended) and click the Next button.
This will search for the Windows 98 driver.
3. Windows will now ask you where to search for the driver software. Select Specify a location
and type in the blank field D:\ Access Point\ DFU\ Driver (where "D" specifies your CD-
ROM).Then, click the Next button.
4. Windows will now search for the driver. After Windows has acknowledged finding the driver,
click the Next button.
5. Windows will now install the driver files. Click the Finish button when completed.
4.2 Installing the Driver Software for Windows Millennium
1. Windows Millennium will automatically identify the Wireless Network Wireless Bridge, once it
is connected to the PC, and prompt you to install the necessary driver. Make sure that the
Setup CD is inserted into your CD-ROM drive.
2. Select Specify the location of the driver (Advanced) and click the Next button. This will search
for the Windows Millennium driver.
3. Windows will now ask you where to search for the driver software. Select Specify a location
and type in the blank field D:\ Access Point\ DFU\ Driver (where "D" specifies your CD-ROM).
Then, click the Next button.
4. Windows will now search for the driver. After Windows has acknowledged finding the driver,
click the Next button.
5. Windows will now install the driver files. Click the Finish button when completed.
4.3 Installing the Driver Software for Windows 2000
1. Windows 2000 will automatically identify the Wireless Network Wireless Bridge, once it is
connected to the PC, and prompt you to install the necessary driver. Make sure that the
Setup CD is inserted into your CD-ROM drive and click the Next button on the Found New
Hardware Wizard screen to proceed.
2. Select Search for a suitable driver for my device (recommended) and click the Next button.
This will search for the Windows 2000 driver.
3. Under "Optional Search Locations", select Specify a location and click the Next button.
4. Windows will now ask you where to search for the driver software. Type in the blank field D:\
Access Point\ DFU\ Driver (where "D" specifies your CD-ROM). Then, click the OK button.
5. Windows will now search for the driver. After Windows has acknowledged finding the driver,
click the Next button.
6. Windows will now install the driver files. Click the Finish button when completed.
Chapter 5 Wireless AP/Bridge DFU Utility
The Wireless AP/Bridge DFU is provided to allow you further customization of the Wireless
Bridge through USB port.
GINA Access Point/Bridge User Guide
Page 3
Advertisement
Table of Contents
