GRE GINA User Manual page 7

GRE Wireless LAN
5.1 Install Wireless Bridge Utility
1. To install the Wireless Bridge Utility, first put the Setup CD into your CD-ROM drive. Then,
click the Windows Start button and select Run from the Start Menu. In the "Open" field, type:
D:\ Access Point\ DFU\ setup. exe. (where "D" specifies your CD-ROM)
2. This will bring up the Welcome screen. After reading this screen, click the Next button to
continue.
3. The Destination screen will show you the default destination chosen by the utility. If you
should want to install this in another location, click the Browse button and select an alternate
destination. When you are ready to continue, click the Next button
4. The next screen will show the Program Folder that the utility will use. If you want to put the
utility in another Program Folder, click an Existing Folder or, if you don't want to run this out of
a Program Folder, delete the Program Folder name. Then, click the Next button to continue.
5. The Utility has now been installed. Then complete installation.
5.2 Configuring the Wireless AP/Bridge with USB Port / AP/Bridge DFU Utility
AP Utility location:
The AP Utility consist of :
1. Code Download (Firmware upgrade) :
2. Utilities (Configuring Wireless Bridge) :
Code Download (Firmware upgrade) :
The Wireless Bridge firmware upgrade can be done through the USB port with AP
Utility.
Caution: You do not need to use this feature unless you have an updated latest AP/Bridge
firmware. Please check at the http://www.greamerica.com website for the latest firmware.
GINA Access Point/Bridge User Guide
Page 4