GRE GINA User Manual page 17

GRE Wireless LAN
station of the Remote LAN can successfully communicate with any station of the
central LAN, as if all of them belonged to the same physical LAN. Wireless Stations
can't be associated with Access Point Clients. The AP conducts the designated traffic
to the appropriate wired or wireless station.
Preferred BSS: It is enabled if you select the Access Point Client option. BSS cor-
responds to the MAC Address of the desired AP.
•
Wireless Bridge: This mode enables a wireless connection between two or more
wired LANs. Two types of connections are possible:
a.) Point to Point: The Wireless Bridge can communicate with a specific Remote
MAC Address.
Remote MAC Address: It is enabled if you select Point to Point option. It corre-
sponds to the MAC Address of the Wireless AP/Bridge of the Remote LAN.
b.) Point to Multipoint: The Wireless bridge can communicate with any Wireless
Bridge available in the same channel. When Authorization Algorithm (see the next
menu - Authorized MAC Address, is enabled, the Wireless Bridge can communicate
with any Wireless Bridge whose MAC Address exists in the Authorization Table.
If changes are made, you need to "Download Changes" under the "File" menu in order to save
them.
c) Authorization Mac Addresses
For security reasons the Wireless Bridge has the ability to associate with authorized MAC
Addresses stations.
•
"Load file" button in order to load a file with the MAC Addresses that can be
associated with the Wireless Bridge (Authorized MAC Addresses).
•
"Download" button in order to download the Authorized MAC Address to the Wireless
Bridge.
•
"Get" button in order to get from the Wireless Bridge the Authorized MAC Addresses.
If changes are made, you need to "Download Changes" under the "File" menu in
order to save them.
Authorization:
Under the "Bridge" submenu, there are three options:
•
Using this submenu the Administrator can change the passwords which referred to
the community field for the User and the Administrator Authority
If changes are made, you need to "Download Changes" under the "File" menu in
order to save them.
Commands Menu :
•
Reset Devices - You can reset the Wireless Bridge. This action takes place after a
user makes configuration changes in order to initiate the changes.
•
Restore Defaults - You can restore the factory default values of the Wireless Bridge.
Info Menu :
GINA Access Point/Bridge User Guide
Page 14