Table of Contents
Advertisement
Quick Links
Quick-Start Guide
Guardian App Cam 24
IP Camera
Use this Quick-Start Guide to connect the camera to the Guardian
Smart Home Control System. For detailed instructions, please refer
to the Online Owner's Manual on the website.
In the Box
• Camera (x1)
• Base (x1)
• Ethernet Cable (x1)
• AC Adaptor (x1)
• Screw Pack
• Quick-Start Guide
Download the Guardian Home app,
when using the AppCam24 as part
of the Uniden Smart Home Control
System.
Download the Uniden AppCam app,
when using the AppCam24 as stand-
alone IP camera.
If any item is missing or damaged, contact your place of purchase
immediately. Never use damaged products!
Need help? Get answers at our website:
www.uniden.com.au for Australian model
1
Advertisement
Table of Contents
Related Manuals for Uniden Guardian App Cam 24
Summary of Contents for Uniden Guardian App Cam 24
- Page 1 • Ethernet Cable (x1) • AC Adaptor (x1) • Screw Pack • Quick-Start Guide Download the Guardian Home app, when using the AppCam24 as part of the Uniden Smart Home Control System. Download the Uniden AppCam app, when using the AppCam24 as stand- alone IP camera. If any item is missing or damaged, contact your place of purchase immediately. Never use damaged products!
-
Page 2: Important Safety Instructions
Important Safety Instructions 1. Do not drop, puncture or disassemble the camera. 2. This camera is NOT waterproof. 3. Never tug on the power cords. Use the plug to unplug it from the wall outlet. 4. Do not expose the camera to high temperature or leave it in direct sunlight. Doing so may damage the camera or cause camera temporary malfunction. 5. For your own safety, avoid using the camera or power off the camera when there is a storm or lightning. 6. Remove the power adaptor during long periods between usages. 7. Use only the accessories and power adaptors supplied. Getting to know your Guardian App Cam 24 PIR Power Sensor Link LED Lens Reset MicroSD Speaker Light Sensor Card Slot Power LED... -
Page 3: Setup The Camera
mounting the Camera 1. Hold the base of the camera stand where you want to mount it and mark the location of the screw holes. 2. Use the included screws and anchors to attach the base to the wall or ceiling. You can also attach the base into a flat surface such as a tabletop if needed. 3. Before attaching the camera, tug gently on the stand to make sure it is securely in place. 4. Disconnect power to the camera. 5. Attach the camera to the mounting screw. Set the mounting post to the correct angle (up to 90° movement). Tighten the circular camera brace up against the App Cam 24 to secure it into place. 6. After installation, reconnect power. Setup the Camera 1. First connect the camera to the Wi-Fi router via the Ethernet cable supplied. 2. Power on the camera using the AC adaptor supplied and wait until both the LEDs glow steady. Note: DO NOT begin the APP setup process until both LEDs glow steady. 3. Launch the ‘Guardian Home’ app, select the Gateway, tap in the ‘Status’ section and... -
Page 4: Verifying The Connection
If you prefer using Ethernet cable, you can now swap the cable supplied with your own. For wireless connection/operation please follow steps below. 1. For camera to work wirelessly with the Gateway, you will need to add router to app. Ensuring that the camera is connected to the router via Ethernet cable, go to Status, tap Edit on upper right and select Camera Edit to enter camera info. 2. In camera info section, tap and enter camera password (default: 123456) to enter Advanced Settings. In Wi-Fi setting section, choose the router and enter its password. Camera will automatically reboot. Please remove the Ethernet cable, and wait until GREEN LED indicator become steady on. Now, the camera can operate wirelessly. XXX-XXXXXX-XXXXX Verifying the Connection: Go to Status and your new camera should ON, tap it once to see live view. -
Page 5: Troubleshooting
Troubleshooting If... Try This... My smartphone Make sure the camera’s green LED is glowing or wireless device steady. If it isn’t, reset the camera by using a cannot find the blunt pin to press and hold the Reset button camera during setup. until the LED begin to flash. The app cannot find Make sure your network supports DHCP the camera protocol. Make sure that the DHCP option is turned on. Make sure the camera and your mobile device connect to the same WiFi router. Make sure the WiFi router is activated. Make sure the camera is properly powered on. Make sure the WiFi router has enabled SSID broadcasting. Make sure you selected the correct router in The camera does not find the router to the Manage WiFi Network box. connect to Make sure you entered the correct password for the router you selected in the Manage WiFi Network box. - Page 6 Networking Parameter Wireless Technology IEEE 802.11 b/g/n Network Connection Ethernet (10/100 Base-T/Base -TX); WiFi Simultaneous Viewers 3 concurrent sessions Security WPA /WPA2/WPA2-PSK (TKIP, 128 bit AES) Camera Parameter Image Sensor Mega pixel CMOS Local Storage Micro SD Card, Class 10 Viewing angle H:75°±3°, V45°±3° Min. Illumination 1~8 lux Number of LEDs 5 IR LEDs with IR switcher IR Distance 5~8 meters Video Audio Parameter Image Compression H.264 Image Resolution HD 1280x720 Recording Frame Rate 720P@20 FPS Supported Mobile Device iOS requirement iPhone 4S / iPad Mini / iPad 2 with iOS 7.0 or above Android requirement Android 4.1X or above Hardware requirement 1.5GHz dual core or above...
- Page 7 Guardian App Cam 24 Important: Satisfactory evidence of the original purchase is required for warranty service. Please refer to our Uniden website for any details or warranty durations offered in addition to those contained below. Warrantor: The warrantor is Uniden Australia Pty Limited ABN 58 001 865 498 (“Uniden Aust”).
- Page 8 Product, together with satisfactory evidence of your original purchase (such as a legible copy of the sales docket) to Uniden. Please refer to the Uniden website for address details. You should contact Uniden regarding any compensation that may be payable for your expenses incurred in making a warranty claim. Prior to delivery, we recommend that you make...