Uniden Guardian App Cam 26 Owner's Manual page 26

If...
No image appears • Make sure the power adaptor is not damaged or
Poor image
quality
Motion detection
is not working
Bright white spots
appear at night
time
26
try this...
defective and is plugged into an electrical outlet with
power.
• Relocate the camera to obtain the best reception of
wireless signals.
• Make sure the camera is properly configured in the
app.
Clean the camera lens using a lens cleaning cloth.
Spots or dust on the lens can also cause image
quality problems.
• Make sure the sensitivity setting is not turned OFF
(Set sensitivity through the Advanced tab).
• Adjust the sensitivity of the motion sensor. (Set
sensitivity through the Advanced tab).
• In motion detection mode, a moving object within
the camera viewing angle is necessary to trigger the
motion sensor for recording.
• Make sure the system date and time have been
correctly set.
The camera's infrared LEDs produce invisible light
that reflects off surfaces such as glass. Install the
camera on the other side of windows or place the
lens flush against the surface to improve the night
vision.
Please check the environment rating (Ingress) of
the camera(s) before installing outdoors.