Search; Fax Redial - Brother MFC-9440CN User Manual

Chapter 8

Search

You can search alphabetically for names you
have stored in the One-Touch and
Speed-Dial memories. (See Storing
one-touch dial numbers on page 55 and
Storing speed-dial numbers on page 56.)
a
Press Search/Speed Dial.
b
Press b.
c
Press the dial pad key for the first letter
of the name.
(Use the chart on Entering text
on page 211 to help you enter letters.)
Press OK.
54
d
Press a or b to scroll until you find the
8
name you are looking for.
Press OK.
e
Press Mono Start or Colour Start.
Note
• If you do not enter a letter and press OK
in c, all registered names will appear.
Press a or b to scroll until you find the
name you are looking for.
• If the LCD shows No Contact Found
when you enter the first letter of the name,
it means that a name for the letter is not
stored.

Fax redial

If you are sending a fax automatically and the
line is busy, the machine will automatically
redial up to three times at five minute
intervals.
If you are sending a fax manually and the line
is busy, press Redial/Pause, wait for the
other fax machine to answer, and then press
Mono Start or Colour Start to try again. If
you want to make a second call to the last
number dialled, you can save time by
pressing Redial/Pause and Mono Start or
Colour Start.
Redial/Pause only works if you dialled from
the control panel.
8