Making N In 1 Copies - Brother MFC-9440CN User Manual

Colour adjust
You can change the default setting for colour
saturation.
To change the default setting follow the steps
below:
a
Press Menu, 3, 4.
Copy
4.Color Adjust
b
Press a or b to choose 1.Red, 2.Green
or 3.Blue.
Press OK.
c
Press a or b to increase or decrease the
colour saturation.
Press OK.
d
Return to b to choose the next colour.
Or press Stop/Exit.

Making N in 1 copies

(page layout)
You can reduce the amount of paper used
when copying by using the N in 1 copy
feature. This allows you to copy two or four
pages onto one page, which lets you save
paper.
Important
Please make sure the paper size is set to
Letter, A4, Legal or Folio.
(P) means Portrait and (L) means
Landscape.
You cannot use the Enlarge/Reduce
setting with the N in 1 feature.
a
Make sure you are in Copy mode
12
b
Load your document.
c
Use the dial pad to enter the number of
copies (up to 99).
d
Press Options.
Press a or b to choose Page Layout.
Press OK.
e
Press a or b to choose 2 in 1 (P),
2 in 1 (L), 4 in 1 (P),
4 in 1 (L) or Off(1 in 1).
Press OK.
f
Press Mono Start or Colour Start to
scan the page.
If you placed the document in the ADF,
the machine scans the pages and starts
printing.
If you are using the scanner glass, go
to g.
g
After the machine scans the page,
12
press 1 to scan the next page.
Next Page?
1.Yes 2.No
h
Put the next page on the scanner glass.
Press OK.
Repeat g and h for each page of the
layout.
12
i
After all the pages have been scanned,
press 2 in g to finish.
Making copies
.
12
77