Advertisement
AQUASMART Room Controller
Room Controller configuration
Access to the configuration menu
Press and hold down the "
MODE
until "1-" appears on the display..
This indicates that the user could set configuration item
number 1.
1- FAHRENHEIT OR CELSIUS: SELECTION
Select between Fahrenheit (F) or Celsius (C) operation.
Factory default is Celsius.
To select while in configuration mode:
• The Configuration Option ("1-") and the current selection
should be displayed.
• Press the "
" button to alter the current selection.
MODE
up
down
• Use either the "
" or "
" button to change between "F" or "C".
UP
DOWN
• To end configuration do not press any buttons for 10 seconds.
To move to the next setting, press the "
"2-" will be displayed.
up
down
Press the "
" button and the display will change to "1-".
DOWN
" button for around 5 seconds
" button again and the
UP
2- AIR SENSOR SELECTION
Program if you want to use the air temperature sensor
present in the Room Controller "On" or the one present in the
units "OF".
The default setting is OF.
To select while in configuration mode:
up
down
• Press "
" botton until "2-" is displayed.
UP
• Press the "
" button to change the current selection
MODE
up
down
• Use either the "
" o "
UP
DOWN
and "On"(ON).
• To end configuration do not press any buttons for 10 seconds.
3- UNIT TYPE
It allows to determine appropriately which unit type is
connected to the Room Controller.
To select while in "
UNIT CONFIGURATION
up
down
• Press and hold down the "
time for around 5 seconds, until "-2" appears on the display.
• Press "
" button to alter the current selection (the "-" will
MODE
disappear).
E N G L I S H
" to change between "OF" (OFF)
" mode:
" and "
" keys at the same
UP
DOWN
GB - 5
Hide quick links:
Advertisement
