Symbols and messages for Blind
Spot Information* and Cross Traffic
Alert*
A number of symbols and messages regarding
the Blind Spot Information (BLIS) and the Cross
Sym-
Message
bol
Blind spot sensor
Service required
Blind spot sensor
Rear sensors blocked, cleaning needed
Blind spot system off
Trailer attached
Related information
•
Blind Spot Information* (p. 341)
•
Activate/deactivate Blind Spot Information*
(p. 342)
•
Limitations of Blind Spot Information*
(p. 343)
•
Cross Traffic Alert* (p. 343)
•
Activate/deactivate Cross Traffic Alert*
(p. 344)
•
Limitations of Cross Traffic Alert (p. 345)
•
Managing messages in the driver display and
the centre display (p. 102)
Traffic Alert (CTA) can be shown on the driver
display.
The following table shows some examples.
Specification
The system does not function as it should. A workshop should be contacted - an authorised Volvo
workshop is recommended.
One or both of the systems' sensors are blocked - check and correct as soon as possible.
BLIS and CTA have been deactivated as a trailer has been connected to the car's electrical system.
DRIVER SUPPORT
* Option/accessory, for more information, see Introduction.
347
Need help?
Do you have a question about the XC90 and is the answer not in the manual?