Ignition Positions - Volvo XC90 Owner's Manual

Hide thumbs Also See for XC90:
Table of Contents

Advertisement

STARTING AND DRIVING

Ignition positions

The car's electrical system can be set in different
levels/positions and in this way make the differ-
ent functions available.
In order to facilitate the use of a limited number
of functions with the engine switched off, the
car's electrical system can be set in 3 different
levels - 0, I and II. These levels are described
with the denomination "ignition position"
throughout the owner's manual.
The following table shows the functions available
in each ignition position/level:
350
Level
Functions
0
Odometer, clock and temperature
gauge are illuminated.
Power seats can be adjusted.
The power windows can be used.
The centre display is started and
can be used.
It is possible to start the audio.
The functions are time-controlled in
this ignition position and are switched
off automatically after a period of time.
I
Panorama roof, power windows,
12V socket in the passenger com-
partment, navigation, phone, venti-
lation fan and windscreen wipers
can be used.
Power seats can be adjusted.
12 V sockets in the cargo area
can be used.
The audio is started automatically
if it was running when the car was
left.
Level
Functions
II
The headlamps come on.
Warning/indicator lamps illuminate
for 5 seconds.
Several other systems are acti-
vated. However, heating in seat
cushions and the rear window can
only be activated after the engine
has been started.
This ignition position consumes a
lot of current from the starter bat-
tery and should therefore be avoi-
ded!
Selecting ignition position
Ignition dial in the tunnel console.
Ignition position 0 - Unlock the car and
store the remote control key inside the car.

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents