Problem Solving Guide - Miele TX3587 Operating And Installation Instructions

With the aid of the following guide, minor problems can be diagnosed and easily
corrected without contacting Miele. Please note that a call-out charge will be
applied to unnecessary service visits where the problem could have been rectified
as described in these operating instructions.
Please note:
,
Repairs to the gas and electrical components of this appliance must only
be carried out by a suitably qualified and competent person to ensure safety.
Repairs and other work by unqualified persons could be dangerous. The
manufacturer cannot be held liable for unauthorised work.
Problem
The burner does not ignite
when the cooktop is being
used for the first time or
after a long period of not
being used.
The burner does not ignite
after several attempts.
Possible cause
There could be air in
the gas pipe.
The burner is not
correctly assembled.
The gas supply tap is
turned off.
The burner is wet
and/or dirty.
The flame slits are
blocked and/or wet.

Problem solving guide

Remedy
You may need to make several attempts before
the burner ignites successfully.
Leave one minute between each attempt at
ignition to prevent a build-up of unburnt gas.
Turn all control knobs to "ß" and interrupt the
power supply to the appliance for a few
seconds.
Assemble the burner correctly.
Open the gas supply tap.
Clean and dry the burner.
Clean and dry the flame slits.
27