Auto Operation - DGM Kameleon 36X3W User Manual

Complete Main Menu
Press The Menu button, then press Up or Down button,
the display will show below:
1) [AXXX]. This is the DMX starting address. See page 8.
2) [Menu], This is the Menu extention setting. See above.
3) [FLAS] or [FADE] or [ACC-]. This is automatic operation. See page 7.
4) [SOUD] or [SOUF]. This is sound-active operation. See page 7.
5) [C1--], [C2--], or [C3--]. This is manuel dimmer of the 3 colors. See page 8.
6) [xr--]. This is the Red color setting for the rainbow effect. See page 10.
7) [xG--]. This is the Green color setting for the rainbow effect. See page 10.
8) [xb--]. This is the Blue color setting for the rainbow effect. See page 10.
9) [tESt]. This is the test running of your programmed rainbow effect by the menu 6- 9. See page
10.
10) [LoAd]. This is the loading of the factory default settings. See page 11.
OPERATION

Auto operation

Press the Menu button. Press the Up or Down button until it shows one of the following:
- FLAS: means strobe effect.
- FADE: means fade in and fade out effect.
- ACCH-: means automatic color changing effect.
Press Enter button to enter.
Press Up or Down button to select one of them, the device will be operated automatically by the
DGM Lighting products 7