DGM Kameleon 36X3W User Manual page 4

CONTROL PANEL
1. LED DISPLAY
2. MENU BUTTON
3. ENTER BUTTON
4. UP BUTTON
5. DOWN BUTTON
SETUP
1. Rigging the device
M ake sure there is no inflammable material near by dur ing
!
installing. Follow the i nstructions stated on the bottom of
the base of this device.
!
U se 2 clam ps to rig the fixtur e onto a t russ. Mak e sure it is
f ixed prop erly! Ens ure the st ructur e (t russ) is s ecure.
This device can be installed directly onto a truss, wall or stage floor in any orientation without
altering its operation characteristics.
Use proper bolts to mount the device via its brackets. The brackets should be attached to the device
with proper bolts!
Always use a secondary safety rope that can hold at least 10 times the weight of the device.
The minimum distance between the device and illuminated surface is 1 meter. There should not be
any flammable materials 10 meters around the device!
2. Connection to mains
Connect the device to mains with the enclosed power plug. The occupation of the connection cables
is as below:
DGM Lighting products 4
!
!