DGM Kameleon 36X3W User Manual page 11

A. Press the Menu button.
B. Press the Up/Down button until it shows [0r--], [0G--], or [0b--] in the display.
The first digit is a figure or letter between 0 - F, means the 16 scenes of rainbow effect. Usually it
will be 0. The r, G, b means Red, Green, Blue color respectively.
C. Press the Enter button. It will show [0xYY]. X means the color you selected (r, G, or b). YY is a
figure between 00-12. This is the dimmer level of the current color for the first scene you set last
time. The first time you will see 00.
D. Press the Up/Down button to select the last 2 digits from 00 to 12.
E. Press Enter button to save. In the display, the first digit will show the number of the next scene
automatically.
F. Press the Up/Down button to select the last 2 digits from 00 to 12.
Repeat the steps E-F until you set the dimmer level for the current color for all scenes (scene 0 to
scene F).
Repeat the above steps until you set the dimmer level for all 3 colors for all scenes (scene 0 to scene
F).
To set different value for all 16 scenes of 4 colors, you will get different rainbow effect at different
speed.
E.g. 0r00, 1r01, 2r03, 3r04,4r05, 5r06...0G12, 1G11, 2G10, 3G09, 4G08, 5G07... You will get a
slow rainbow effect, the red color fade in while the green color fade out.
Rainbow effect operation
After your setting of all the 16 scenes of the rainbow effect, the device can work in the Rainbow
effect operation.
Press the Menu button.
Press the Up/Down until it shows [tESt] in the display.
DGM Lighting products 11