Display Window - DGM Kameleon 36X3W User Manual

the last fixture.
4. Control panel and display
The control panel on the device allows you to control the device, including DMX start address
setting, Automatic operation setting, Manuel dimmer, Rainbow effect setup, etc.

Display window

The device use a 4-digits red color LED display module for displaying your setting.
The module can display some simple letters and figures.
Buttons for setup
MENU button: Prepare to select the menu or exit without saving
UP / DOWN: Select the menu or select your desired value
ENTER (SAVE): Enter main menu / Save your selected value
Menu extension
The LED display allows you to extend or abbriviate the menu.
Press the Menu button.
Press the Up or Down buttons until it shows -Menu- in the display.
Press Enter button to enter setting.
Press the Up or Down buttons to select -on- or -oFF-.
Then press the Enter button to save or press the Menu button to exit.
If you select -on-, then the menu is complete.
If you select -oFF-,then the menu is incomplete. The display will only show the -AXXX- for
DMX control mode and -Menu- for Menu extention.
DGM Lighting products 6