Factory Default Setting; Master/Slave Operation - DGM Kameleon 36X3W User Manual

Press the ENTER button. It will show [ run] in the display.
Press the Enter button.
The device will now work in the Rainbow operation with the scenes you set.

Factory default setting

Press the Menu button. Press the Up/Down button until it shows [LoAd] in the display.
Press the ENTER button. It will show one of following:
- [Addr]: only the DMX start address will be preset to default.
- [Auto]: only the FLAS/FADE/ACCHvalues will be preset to default.
- [Clor]: only the C1-C4 values will be preset to default.
- [rAin]: only the rainbow scenes you set will be preset to default.
- [ALL ]: all data will be preset to default.
Press Up/Down button to select one of them.
Press the Enter button.
Master-slave operation
More devices can work syncronizely when there is no DMX signal input.
For Master-slave operation, you need to use one device as the master. The master device can be any
one in a DMX (Master-slave) chain.
The Master device must be set to Auto, Sound, Rainbow or Manuel operation. The slave devices
must be set to work in DMX mode.
DGM Lighting products 12