Download Print this page

Black & Decker HP9012 Manual

Hide thumbs

Advertisement

Quick Links

UK
Ireland
HP9012
Australia
HP9019
New Zealand
1

Advertisement

loading

  Also See for Black & Decker HP9012

  Summary of Contents for Black & Decker HP9012

  • Page 1 Ireland HP9012 Australia HP9019 New Zealand...
  • Page 4: Intended Use

    Intended use The tool will do the job better and safer at the rate for which it Your Black & Decker drill/screwdriver has been designed for was intended. Do not force the tool. screwdriving applications and for drilling in wood, metal and Warning! The use of any accessory or attachment or performance plastics.
  • Page 5 Under extreme conditions, battery leakage may occur. Fitting and removing a drill bit or screwdriver bit When you notice liquid on the battery, proceed as follows: (fig. C & F) - Carefully wipe the liquid off using a cloth. Avoid skin This tool uses screwdriver bits and drill bits with a 1/4"...
  • Page 6: Maintenance

    To lock the tool, set the forward/reverse slider into the When screwing in hardwood, also drill a clearance hole centre position. with a depth equal to half the length of the screw. For the optimum size of the clearance hole, refer to the table below. Drilling/screwdriving (fig.
  • Page 7: Protecting The Environment

    You can Technical data check the location of your nearest authorised repair agent by HP9012/HP9019 contacting your local Black & Decker office at the address Voltage indicated in this manual. Alternatively, a list of authorised...
  • Page 8 5101888-04 06/03...

This manual is also suitable for:

Hp9019