(Original instructions) ENGLISH Intended use f. If operating a power tool in a damp location is unavoidable, use a residual current device (RCD) Your Black & Decker Pivot Driver™ has been designed for protected supply. Use of an RCD reduces the risk of screwdriving applications.
ENGLISH (Original instructions) d. Store idle power tools out of the reach of children and Hold power tool by insulated gripping surfaces when do not allow persons unfamiliar with the power tool or performing an operation where the fastener may these instructions to operate the power tool.
(Original instructions) ENGLISH Labels on tool Electrical safety The following pictograms are shown on the tool: Your charger is double insulated; therefore no earth wire is required. Always check that the mains Warning! To reduce the risk of injury, the user must voltage corresponds to the voltage on the rating read the instruction manual.
ENGLISH (Original instructions) LED light The charger may hum and become warm while charging; this is normal and does not indicate a problem. The LED light is activated automatically when the trigger is depressed. The LED will illuminate when the trigger is partially Generally, a charging time of 8 hours will enable the tool to depressed, before the unit begins running.
(Original instructions) ENGLISH Warning! Before performing any maintenance on the tool, Technical data remove the battery from the tool. Unplug the charger before PP360 (H1) cleaning it. Voltage Regularly clean the ventilation slots in your tool and No-load speed charger using a soft brush or dry cloth.
ENGLISH (Original instructions) Guarantee Black & Decker is confident of the quality of its products and offers an outstanding guarantee. This guarantee statement is in addition to and in no way prejudices your statutory rights. The guarantee is valid within the territories of the Member States of the European Union and the European Free Trade Area.
ENGLISH Do not forget to register your product! www.blackanddecker.co.uk/productregistration Register your product online at www.blackanddecker.co.uk/productregistration or send your name, surname and product code to Black & Decker in your country.
Australia Black & Decker (Australia) Pty. Ltd. Tel. 03-8720 5100 20 Fletcher Road, Mooroolbark, Fax 03-9727 5940 Victoria, 3138 New Zealand Black & Decker Tel. +64 9 259 1133 5 Te Apunga Place Fax +64 9 259 1122 Mt Wellington Auckland 1060 United Kingdom Black &...