TM RACING 250Fi EN Use And Maintenance Manual page 41

A CLEAN MOTORCYCLE CAN BE CHECKED MORE QUICKLY AND AT A LOWER COST
Check distribution chain
Replace distribution chain
Check cylinder and piston wear
Fully replace piston
Check head
Check camshafts and rocker arms
Replace valves, springs, half cones and plates
Fully replace piston rod
Check clutch discs
Check clutch springs
Check transmission and gear
Check oil pumps and lubrication circuit
Fully replace engine bearings
Fully replace engine oil seal
WARNING
COMPONENTS MUST BE REPLACED IF A DEFECT IS DETECTED OR WEAR LIMIT VALUES ARE EXCEEDED.
WE RECOMMEND MOUNTING AN HOUR METER.
THE ABOVE-MENTIONED OPERATIONS MUST BE PERFORMED BY AN AUTHORISED TM WORKSHOP OR SPECIALISED PERSONNEL.
250Fi EN/SMR/SMM MAINTENANCE TABLE
41
4.1 MAINTENANCE SCHEDULE
AFTER EVERY EVERY
1 HOUR 15 HOURS 30 HOURS
(AFTER EVERY
RIDE)
EVERY EVERY EVERY
45 HOURS 135 HOURS YEAR
(75 HOURS
OF SPORT USE)
•
•
•
•
•
•
•
•
•
•
•
•
•
•
4 S T R O K E S 4 S T R O K E S