Operating the answering machine
Operating when on the move
(remote operation)
You can check or activate the answering
machine from any other telephone (hotel,
pay phone, etc.).
Requirements:
u
The phone you are using for remote oper-
ation must have tone dialing (DTMF), so
that you hear different tones when you
press the keys.
u
You must activate Remote Access.
Activating Remote Access
¢
§Menu§
Answer Machine
¢
Remote Access
On / Off
Select and press
your selection.
Calling the answering machine and
playing back messages
~
Dial your own number.
; ~
While listening to your
announcement, press the ;
key and enter the system PIN
(default setting: 0000,
see page 31).
You will be informed whether any new mes-
sages have been recorded. The messages are
then played back. You can now operate the
answering machine using the keypad.
24
¢
Settings
§OK§
to confirm
Operating the answering machine
using the keypad
The following keys are used:
0
Delete the current message.
A
Repeat the previous message.
B
Play the message.
3
Skip to the next message.
G
Turn on the answering machine.
H
Stop message playback.
9
Turn off the answering machine.
;
Enter the remote access code if the
answering machine is on.
Note:
After message playback, if no key operation is
detected for 10 seconds, the call will be
terminated.
Activating the answering machine
~
Dial the number of the line you
want to activate answering
machine for.
¤
Allow the phone to ring until the ring
back tone stops and the phone answers
with a beep.
~
Enter system PIN (default set-
ting: 0000, see page 31).
u
If messages are stored on the answering
machine:
The answering machine starts playback.
¤
Press the H key to stop playback.
¤
After the beep press the G key to acti-
vate the answering machine.
Or