Table of Contents
Advertisement
Your current call is put on hold. The other
line is off the hook.
~
Enter the number for the sec-
ond party.
A call to the second party is established.
Toggling between two external
calls
In the display, you can see which line is
active (icon Ê or Ë) and which line is on
hold.
C/h Press the line key of the line you
want to talk to.
The selected line is now active; the other is
put on hold.
Starting an external conference
call
You can make conference calls with two
external parties by following these three
steps:
1. Call the first party (see page 12).
2. Call the second party (see "Starting a sec-
ond call" on page 28).
3. Start the conference call:
¢
§Menu§
Conference
§OK§
Press the display key to start the
conference.
Ending an external conference call
Ending all calls
a
Press the End Call key.
Talking to one party and putting the
other party on hold
C / h Press the line key for the party
you want to talk to.
The conference call is ended. You will talk to
the party whose line key you pressed. The
other party will be put on hold.
Handset settings
Your handset is preconfigured, but you can
change these settings to suit your individual
needs.
Changing the name of a
handset
The names "INT 1", "INT 2", etc., are assigned
automatically during registration. You can
change these names. The number of the
handset, however, never changes. The
changed name is only displayed on this
handset.
¢
¢
§Menu§
Settings
¢
Handset Name
~
Enter the name and press
The name must not exceed 12
characters.
Changing the display
language
You can view the display texts in different
languages.
¢
¢
§Menu§
Settings
¢
Language
English / Español / Français
Select a language and press
Setting the display contrast
You have a choice of five different contrast
levels.
¢
¢
§Menu§
Settings
¢
Display Contr.
Level 1 / ... / Level 5
Select a level and press
Handset settings
Handset
§OK§
.
Handset
§OK§
Handset
§OK§
.
29
.
Advertisement
Table of Contents
