Mac Filtering - TP-Link Archer CR700 User Manual

Archer CR700
To add a IP Address Filtering entry:
1. Click button, then you will see a setting page.
Enter the Start IP Address and the End IP Address.
2.
3. Check Enable this Entry for this entry, as shown in the following figure.
4. Click the OK button to save this entry. If you do not want to save this entry, click the Cancel
button.

5.6.2 MAC Filtering

Choose menu "Advanced  NAT Forwarding  MAC Filtering", and then then you can control
the client's access by configuring the MAC Filtering function.
C1750 Wireless Dual Band DOCSIS 3.0 Cable Modem Router User Guide
Figure 5-37
Figure 5-38
61