Archer CR700
To add a IP Address Filtering entry:
1.
Click
button, then you will see a setting page.
2.
Enter the Start Port and the End Port.
3.
Select the Protocol which you want.
Check Enable this Entry for this entry, as shown in the following figure.
4.
5.
Click the OK button to save this entry. If you do not want to save this entry, click the Cancel
button.
5.6.4 Port Forwarding
Choose menu "Advanced NAT Forwarding Port Forwarding", and then then you will see
the screen as shown below.
Service Name - The virtual server you want to use.
C1750 Wireless Dual Band DOCSIS 3.0 Cable Modem Router User Guide
Figure 5-41
Figure 5-42
63