Lan; Lan Settings - D-Link DPH-400S User Manual

User
Password
Notice:
1) Click "Apply" button after finished your setting, IP Phone will save the
setting automatically and new setting will take effect.
2) If you modify the IP address, the web will not response by the old IP
address. Your need input new IP address in the address column to logon in
the phone.
3) If networks ID which is DHCP server distributed is same as network ID
which is used by LAN of system, system will use the DHCP IP to set WAN,
and modify LAN's networks ID (for example, system will change LAN IP
from 192.168.10.1 to 192.168.11.1) when system uses DHCP client to get IP
in startup; If system uses DHCP client to get IP in running status and
network ID is also same as LAN's, system will refuse to accept the IP to
configure WAN. So WAN's active IP will be 0.0.0.0.

LAN

8.3.2.2
Field name
IP Address
Subnet Mask
DHCP Service
Input your ADSL account.
Input your ADSL password.

LAN Settings

explanation
Specify LAN static IP.
Specify LAN Netmask.
Select the DHCP server of LAN port or not. After you
modify the LAN IP address, phone will amend and
adjust the DHCP Lease Table and save the result
amended automatically according to the IP address
and Netmask. You need reboot the phone and the