Strategy For Replacing A Hard Disk Drive, A Solid-State Drive, Or An Msata Solid-State Drive; Important Notice For Replacing A System Board; How To Use Error Message - Lenovo ThinkPad X230 Tablet Manual

Strategy for replacing a hard disk drive, a solid-state drive, or an mSATA
solid-state drive
Always try to run a low-level format operation before replacing a hard disk drive or a solid-state drive. This
will cause all customer data on the hard disk drive or solid-state drive to be lost. Be sure that the customer
has a current backup of the data before you perform this task.
Attention: The drive startup sequence in the computer you are servicing might have been changed. Be
extremely careful during write operations such as copying, saving, or formatting. If you select an incorrect
drive, data or programs can be overwritten.
If the computer is shipped with both an mSATA solid-state drive and a hard disk drive, the mSATA solid-state
®
drive is used for the "cache" function and to support the Intel Rapid Start Technology. We recommend that
users do not replace the mSATA solid-state drive by themselves. Otherwise, the "cache" function will not
work and the Intel Rapid Start Technology cannot be used any more.
Attention: Ensure that you partition the mSATA solid-state drive after installing it on the computer you are
servicing. Otherwise, the mSATA solid-state drive will not function correctly. For instructions on how to
partition an mSATA solid-state drive, go to http://www.lenovo.com/support/msata-fru.

Important notice for replacing a system board

Some components mounted on a system board are very sensitive. Improper handling of a system board can
cause damage to those components, and may cause a system malfunction.
Attention: When handling a system board:
• Do not drop a system board or apply any excessive force to it.
• Avoid rough handling of any kind.
• Avoid bending a system board and hard pushing to prevent cracking at each Ball Grid Array (BGA) chipset.

How to use error message

Use the error codes displayed on the screen to diagnose failures. If more than one error code is displayed,
begin the diagnosis with the first error code. Whatever causes the first error code might also cause false
error codes. If no error code is displayed, see whether the error symptom is listed in the "Symptom-to-FRU
Index" section.
18
Hardware Maintenance Manual