Using The Screen Settings - Sony Bravia KDL-19M4000 Operating Instructions Manual

Using the Menus
EEl
Using the Screen Settings
•
Option Description
Wide Zoom Select to fill screen with minimum distortion.
Normal Select to display 4:3 picture in original size when the original source is 4:3.
tl:D
Normal is not available when you are watching 72Dp or 1 DaDi sources.
Full
Select to enlarge the picture horizontally to fill the screen when the
original source is 4:3 (Standard definition source). When the original
source is 16:9 (High definition source), select this mode to enlarge the
picture vertically to fill the display area.
16:9 Select to display 16:9 picture in original size.
Zoom
Select to enlarge the original picture without distorting the aspect ratio.
tl:D
Wide Zoom and Normal are not available when you are watching 72Dp or 1 DaDi
source from component video input or 72Dp, 1 DaDi or 1 DaDp source from HDMI
input.
Select to have the screen automatically change to the screen mode that
is best for the current program. If frequent screen changes are disturbing
to you, select Off.
Select to turn off the Auto Wide option. Choose a screen mode from the
Wide Mode option.
Select to enlarge the 4:3 picture to fill the display area, keeping the
original image as much as possible.
Select to display the 4:3 picture in its original size.
Select to enlarge the 4:3 picture horizontally only, to fill the display area.
Select to enlarge the picture to 16:9 aspect ratio.
Select to enlarge the picture horizontally and vertically to an equal
aspect ratio that fills the wide screen.
Select to continue using the current Wide Mode setting when the
channel or input is changed.
tlJJ
If 4:3 Default is set to anything but Off, the Wide Mode setting changes only for the
current channel. When you change channels (or inputs), Wide Mode is automatically
replaced with the 4:3 Default setting for 4:3 sources.
Wide Zoom
Off
On
Off
Wide Mode
Auto Wide
4:3 Default
Select the default
Screen Mode to use for Normal
4:3 sources Full
16:9
Zoom
27