Changing The Battery - Accurate Technology ProScale 18W User Manual

Changing the Batteries
A low battery indicator will appear in the lower left corner of the LCD.
Press and hold
When battery voltage drops below approximately 2.6V the DRO will turn itself
off until the batteries are replaced.
To replace the battery:
Remove the screws in the upper right and lower left corners. Pull the cover
off. Remove the old batteries. Reinstall 2 new AA Alkaline batteries, noting
the proper orientation. Replace the cover and tighten the screws.
CAUTION: DO NOT BEND BATTERY CLIPS!
THESE CLIPS ARE DESIGNED TO BE LOOSE
WHEN THE CASE IS OPEN AND WILL
COMPRESS AND SECURE THE BATTERIES IN
PLACE WHEN THE CASE HALVES ARE
SCREWED TOGETHER.
Accurate Technology ProScale Model 18W
key for 6 seconds to display the Battery Voltage.
DATUM
Page 15 of 20