Setting The Time - Citizen Movement Caliber C660 Setting Instructions Manual

9. SETTING THE TIME (TIME IS CORRECTED BY DIGITAL DISPLAY)
When digital time is corrected, the second, minute, hour, 24 hour and UTC hour
and minute hands of the analog time are corrected automatically in conjunction
with digital time.
1. Turn the crown and set the mode hand to the time [TME] mode.
2. Press either button (A) or button (B) to access the city to be corrected.
3. When the crown is pulled out to the second click (time setting position),
the watch enters the time correction state.
4. When button (A) is pressed, the location to be corrected changes each time
it is pressed. Select the location to be corrected. (The location that is
flashing is the location that can be corrected.)
When button (B) is pressed in the [SMT] daylight savings time correction
state daylight savings time can be set (ON) or canceled (OF).
"Seconds" return to zero when button (B) is pressed in the "seconds"
correction state.
When the crown is turned forward (clockwise) in the "hour" or "minute"
correction states, correction is made in the positive direction. Turning
the crown continuously allows "hours" or 11 minutes" to be corrected
continuously. Although correction can be made in the negative direction
when the crown is turned backward (counter-clockwise), always make sure to
turn the crown forward to ensure that the time is set correctly.
Switching "12H/24H time" is performed by pressing button (B).
5. After corrections have been completed, return the crown to the normal
position.
<Normal Time Display>
Notes:
1. Daylight savings time can be set for each city.
2. When the time is set for any one city, the times of other cities, including
UTC time, are corrected automatically
3. When changing the time, the crown and buttons do not respond even if
operated. Ensure that the required operation is performed correctly by first
checking that the time has changed
Return to Table of Contents
Return to Table of Contents